Fully Automatic Deck Floor Roll Forming Machine with PLC Panasonic

Model NO.: RF-DF Material Thickness: 0.75-1.2mm Forming Stations: 24 Stations Trademark: Suhang Origin: Wuxi, Jiangsu Brand Name: Suhang Control System: PLC Panasonic Main Motor Power: 5.5kw Specification: CE. SGS. ISO9001: 2008 HS Code: 8455229090 Fully Automatic Deck Floor Roll Forming Machine with PLC Panasonic

The main description:
1. Roll Forming Machine: ZJ 44-250-1000
2. Rolling Speed: 15m/min(cutting time is not include)
3. Steel sheet Thickness: 0.75-1.2 mm
4. Control System: PLC: (Panasonic)
5. Un Coiler: 5 ton manual
6. Roller Stations: 24stations
7. Roller Material: 45# forge steel, coated with chrome
8. Shaft Material and DIA: 85mm, material is 45# forge steel
9. Maim Motor Power: 5.5kw
10. Hydraulic Station Power: 2.2kw
11. Hydraulic Pressure: 15Mpa
12. Material Of Cutting: Cr12
13. Material Of The Stations: Memorial archway
14. Tolerance: 3m+1.5mm
15. Power supplier: 380V, 50HZ, 3 phase
16. Way Of Drive: 1.2 inch single chain
17. Color of The Machine: Blue

Cutting:
(1) Cutting motion: The main machine stops and then cut automatically. After cutting, the main machine re-starts automatically.
(2) Material of blade: GCR12 with heat treatment
(3) Length measuring: Automatically
(4) Tolerance of length: + 1.5mm

Control Box: Panasonic Brand
(1) Power supplier: 380 V, 50 Hz, 3Phase (adjusted with the requestment)
(2) Length & quantity measurement automatically;
(3) Length & quantity controlled by PLC,
(4) Length inaccuracy can be amended easily.
(6) Control panel: Button-type switch and touch screen
(7) Unit of length: Millimeter (switched on the control panel)

The panel produced by this machine has high strength with big wave. It adheres well to concrete. It is used on high buildings. It not only saves steel mold plate, but also saves investment.
The deck floor panels forming by this machine is used for high building surface panels, it has so many good advantages, such as high wave, high strongness, high atuomation, low cost.

Machine Components:
Unpowered Decoiler, Main forming machine, Forming cutter, Computer control system, Hydraulic station, Product Rack

Working Flow

Decoiling guiding and feeding roll forming cut to length run out table

We can design and manufacture the machine according to clients' request! Please send us the enquiry with Profile Drawing.

Number	Items	Unit\Type	RF-FD
1	Steel Thickness	mm	0.8-1.2
2	Steel feeding width	mm	1000-1250
3	Forming Speed	m/min	10-15
4	Roller stands	stand	30-36
5	Roller Material		45# steel, coated with chrome
6	Hydraulic cutting Power	Kw	18
7	Hydraulic pressure	Kw	5
8	Hydraulic pressure Mpa	Mpa	12
9	Power Supply		380V, 50HZ,3 phase
10	Tolerance	mm	1.5
11	Material of cutting		Cr12
12	Control system		PLC with touch screen
13	Machine net weight	T	16

Contact us if you need more details on Cold Roll Floor Deck Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Floor Decking Roll Former Machine、Metal Sheet Roll Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Decking Floor Roll Forming Machine