Metal Stud and Track Roll Forming Machine
|Terms of Trade:||FOB,CFR,CIF|
|Min. Order:||1 Set/Sets|
|Delivery Time:||45 Days|
|Place of Origin:||China|
Model No.: Metal Stud and Track Roll Forming Machine
JCX Stud and Track Roll Forming Machines are made according to the clients` specific requirements, our focus has always been to get the last minute details of each of our products. The range we offer is manufactured using superior quality materials and keeping the requirements of our clients in mind. We supply upgraded machines at competitive prices at the market. Our Stud and Track Roll Forming Machine produces C stud/lipped channel or U tracks from the size 80-300mm with punching holes and sizes adjustment fully automatically.
1.C&U type specification:
1)Material:hot dipped galvanized coil,galvalume steel
2)Thickness of material:0.35-0.7mm
4)Width of material:
C type → 49.5*36mm:133mm C type → 69.5*39.5mm:160mm
U type →50.5*26mm:101mm U type → 70.5*31mm:131mm
5)Sizes of imposing:
Main technical conditions of the forming line:
Voltage:380V,50HZ,3P(or according to customer request)
Production capacity:0-50meters/min(without punching,no stop cutting)
0-30meters/min(with punching,no stop cutting)
Dimension (L*W*H): L≈ 5.3 m, W≈ 0.9 m, H≈ 1.5 m
Specification of the shipping container:(the number is pre-estimated ≈, final data should be confirmed in two weeks before delivery.)
| || || |
3. Flow Chart of roll forming machine:
5.Photos of Machine
6. Technology parameters:
The weight of machine is about 3.5tons
The total dimension of machine:5300(L)*900(W)*1500mm(H)
6.1 Two head head Manual uncoiler: 1SET
Capacity of uncoiler:2-3tons
Expansion of segment:Manual
Rotation of segment:ManualNumber of segment:4
Approximate size:Length:2.3m width:1.1m height:1.5m
Entrance and adjustable wheel: 2rolls
6.3 Main forming machine:
It adopts separate wall structure with gear box transmission.The machine base is made by welded steel with destressing treatment.
Main motor type: 3 phase asynchronous motor
Main motor power: 15KW
Forming speed: 0-50m/min(without punching),0-30m/min(with punching)
Approx. 14 groups rollers
Roller : Roller Material is forged Cr12, HRC58-62
Shaft: Shafts of rollers are tooled by grinding machine for two times to ensure the precision of final product. Diameter of main shaft: ø60mm
Material of shaft:40cr,quenching HRC45
Transmission type: by gear box and chain
Power of servo tracking cutting:3kw
6.4 Hydraulic System:
Material of blade: Cr12Mov(HRC58-62)
Length measuring: Automatic encoder length measuring
Power of cutting:5kw
Way of cutting:no stop cutting&punching(servo tracking)
Punching die:adopt cell structure design,the die is adjustable.It has features like long life,easy replacement and repairing.
6.5 Punching system:
Material of punching die:CR12,HRC58-62
6.6 Product support frame
Size:L 6m x W 0.4m
Power of motor:2kw
Total length of table:6 meters
Driving of table:by one inch chain,
Power of pushing device:5kw motor
Sensors fix on pushing device,to make sure it push the ready sheet perfect.
The speed of collecting table should be a little bit higher than forming machine to insure smooth running.
6.7 PLC Control System
The whole line is controlled by PLC and touch screen.The PLC system is with high speed communication module,it is easy for operation.The technical data and system parameter can be set by touch screen.
Control the quantity &punching length& cutting length automatically
The Machine will be no stop while it is punching and cutting
Automatic Length measurement and quantity counting (precision 3m+/-3m
Botou Golden Integrity Roll Forming Machine Co.,Ltd
Botou Golden Integrity Roll Forming Machine Factory is located in "the town of casting molds", enjoying convenient and highly effective transportation for being close to Tianjin Port, No.104 National Way, No.106 National Way and Jingjiu Railway.
Our technical force is abundant. Production equipment is advanced, detection means is complete.
We specialize in the professional production of various types of roll forming machines, and the development and production of fully automatic intelligent control roll forming machines of C-shaped steel and dust collector anode plates, and other equipment. On the basis of traditional roll forming machines, we also develop new computer fully automatic roll forming machines, roof and wall panel forming machines, glazed tile forming machines, floor bearing plate forming machines, high-speed barrier devices, double color steel tile molding machines, C and Z steel machines, arch appliances, sandwich composite plate machines, shearing machines, bending machines, and heat insulation sandwich composite machines. Our products have reached the advanced level in the same industry.
As beautiful appearance, reasonable structure, and tile-based standards of our products, they are popular among new and old customers. Products are sold to domestic enterprises.
Our factory has highly qualified and experienced professionals and highly skilled construction workers to serve you. Our factory can design and produce various kinds of special-shaped cold-formed molding equipment for different needs of the users. You are welcome to contact us for more information.
- Company Name: Botou Golden Integrity Roll Forming Machine Co.,Ltd
- Representative: YANG JIE
- Product/Service: Roof Panel Roll Forming Machine , Cz Purlin Roll Forming Machine , High Way Crash Barrier Roll Forming Machine , Light Gauge Framing Machine , Roller Shutter Door Forming Machine , Double Layer Roll Forming Machine
- Capital (Million US $): 500000RMB
- Year Established: 2010
- Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
- Export Percentage: 51% - 60%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 15
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 5,000-10,000 square meters
- Factory Location: ECONOMIC DEVELOPMENT ZONE ,BOTOU CITY
- Contact Person: Mr. JIE YANG
- Tel: 86-318-8189095
Premium Related Products